CANTILEVER RACKING

  • Our new development combines all the advantages of today's cantilever systems
  • A robust base made of hot-rolled IPE mild steel profiles avoids damage from forklifts
  • The cantilevered arm deflects upwards in case of impacts. High safety, high load capacity
  • Environmentally and material-friendly design of the cantilever arms
  • Suitable for long goods and for pallets.  All industries.  All applications.

CANTILEVER COLUMN
  • Load-bearing steel profiles made of quality steel with parallel profiles
  • Parallel uprights simplify storage/retrieval
  • Arms adjustable in 76mm increments optimises the height division of the shelves
  • Double-sided column punching allows for change to double-sided use in the future
  • All components are screwed or plugged in, which facilitates future conversion and expansion.
  • 3 Grades of uprights, available in 21 standard heights and payloads up to 6000 kg. Payloads available

4100
mm

4400
mm

4800
mm

5200
mm

5600
mm

6000
mm

6300
mm

COLUMN BASE
  • Base made of robust, hot-rolled structural steel IPE sections
  • Due to the solid design, it is resistant even to forklift impacts.
  • The standard hot-dip galvanisation prevents corrosion, especially in the case of waterlogging.
  • Single / double-sided bases available in 10 versions

CANTILEVER ARMS

800 mm /
660 kg

1000 mm /
850 kg

1250 mm /
800 kg

1250 mm /
1000 kg

1500 mm /
600 kg
  
  • Tapered cantilever arm design optimises the shelf heights
  • The arms are connected to the column without tools via a plug-in bolt system
  • Huge advantage: the arms are flexible connection and move with impacts from goods or forklifts
  • Very simple, tool-free adjustment of the cantilever arms possible
  • Powder coating in exterior quality finish and resilient against mechanical impacts

COLUMN BRACINGS

The centre distances are available in three dimensions:            1000 mm             1250 mm           1500 mm

ROOF CANOPY

  • the roof consists of roof sheeting, purlins, guttering and roof canopy support arms
  • The roof canopy arms are mounted securely and wind resistant on the cantilever columns with push-in bolts.
  • the purlins and the roof sheeting are square timber and trapezoidal sheeting provided by the customer

SHELF GRATINGS

  • Gratings create a continuous storage level without interfering intermediate uprights
  • Pallets, wire mesh boxes, goods carriers with/without overhang of all dimensions can be stored without loss of space
  • The gratings are placed on the cantilever arms and bolted with clamping brackets
  • Retrofitting with gratings is possible at any time